Key Features
EN 149:2001+A1:2009 approved
Adjustable nose clip
Provides a good seal around the face
Ultrasonically welded headbands

Material Composition
Nonwoven fabric and Melt-blown fabric
Headbands – Terylene, spandex
Nose Clip – Plastomer, metal
Parts of the respirator which come into contact the wearer have no sharp edges or burrs.
This respirator contains no components made from natural rubber latex.

Technical Specifications
PFE (Particle Filtration Efficiency/Paraffin oil/Sodium chloride)≥99%
Breathing resistance: inhalation(95L/min)≤300Pa, exhalation(160L/min)≤300Pa
The breaking strength at the connection point between headbands and respirator body should not
be less than 10N.
Flammability : Flammability Rating Class I
When tested, the particle filtering half mask shall not burn or not to continue to burn for more than
5s after removal from the flame.

Applications Scope
Non-powered air-purifying particle respirator to protect against particles from the ambient
air, except for atmospheres containing less than 19.5% oxygen, underwater operation, escape
purpose and firefighting respirator.
Intended provisionally for wearing in middle or high risk areas during the COV-19
pandemic situation.
(Always follow User Instructions and use only in the indicated manner).

Caution
DO NOT use for gases or vapours (i.e. anesthetic gases such as isoflurane or vapours from sterilants
such as glutaraldehyde).
DO NOT use for asbestos, arsenic, cadmium, lead, 4,4′-methylenedianiline (MDA), or abrasive blasting.
DO NOT use in any manner not indicated in the User Instructions.

Approvals and Standards
Meets EN 149:2001+A1:2009 standard requirements for a minimum 99% filtration.

Shelf Life and Storage
3 years from the date of manufacture.
Production date on box in YYYY/MM format.
Store respirators in the original packaging, away from contaminated areas, dust, sunlight, extreme
temperatures, excessive moisture, and damaging chemicals.
Store respirators against mechanical damage.
Store in temperatures between -4°F(-20°C) and +86°F(+30°C) and not exceeding 80% RH.